Skip to content
Collaborate. Discover. Innovate.

The Sintering Process

A core thermal treatment process for functional powder metal applications in Conventional Press & Sinter, Metal Injection Molding, and Metal 3D Printing. 
GET MORE DETAILS

What is Sintering?

Sintering is a heat treatment for bonding particles in a solid state that is applied to a powder compact to increase a component's strength and integrity. 

After compaction, neighboring powder particles are held together by cold welds, which give the compact sufficient “green strength” to be handled. At sintering temperature, diffusion processes cause necks to form and grow at these contact points.

Diffusion of atoms from one particle to another and between elements progresses at higher rates with increased temperature. The closer to the melting temperature of the material, the faster the sintering process progresses - and the better the final material properties.

sintering

DSB Technologies: Your Sintering Expert

Furnace_Area

We bring over 50 years of sintering expertise and the world's largest capacity of high temperature sintering to support high performance parts for high volume production in powder metallurgy, metal injection molding, and metal 3D printing.

High volume production of high-performance metal parts requires vast sintering expertise and capacity to drive efficient operations. DSB Technologies offers the knowledge and technology needed to enable volume production through three forming technologies: press and sinter, metal injection molding, and metal 3D printing.

The sintering process's complexity comes from the ability to control shrinkage and dimensional control. Through  years of development in dimensional control of sintering, DSB Technologies is the metallurgical partner for industrial manufacturers with volume production targets who need the power of sintering without development bottlenecks. 

DSB's Sintering Furnace Portfolio

0
CM HT Furnaces (1400 C)
0
HT HT Furnaces (1400 C)
0
Hayes HT Furnaces (1340 C)
0
Ceramic Belt Furnaces (1340 C)
0
Brazing Furnace
0
Delube Furnaces
0
HT Vacuum Furnace (1600 C)
0
LT Belt Furnaces (1150 C)

The Sintering Processes Explained

Conventional Sintering

Conventional sintering is the standard practice of sintering uniaxial compacted PM components in metal belt conveyor furnaces. The maximum temperature is defined by the equipment capabilities; specifically the life of the metal muffle and metal belt. This maximum temperature is roughly in the range of 2050 F to 2150 F (1120 - 1180 C). 

Materials & Benefits

The maximum temperature for conventional sintering can provide useful physical and mechanical properties for structural components in iron and low alloys steels, stainless steels, brass, bronze, copper, and aluminum. Many applications benefit from improved mechanical properties and moderate corrosion resistance with conventionally sintered 316 stainless steel. Process benefits for conventional sintering include: low material waste, solid dimensional control, and net shape or near net shape final dimensions.

Learn More

High Temperature Sintering

While conventional sintering provides useful physical and mechanical properties, high temperature allows for optimum properties. Higher sintering temperature and time at temperature leads to more mass transport, more rounded residual pores, stronger bonds between particles, and greater  densification. This enables better mechanical, physical, and magnetic properties. 

Materials & Benefits

High temperature sintering (HTS) is particularly beneficial for stainless steels where densification occurs to reach non-interconnected surface porosity, greatly enhancing corrosion resistance - even exceeding that of comparable wrought steels. Also, ductility and toughness are improved with HTS in low alloy steels containing chromium, similar in composition to 4140 steel. Process benefits for HTS include improvements in corrosion resistance, high temperature oxidation resistance, ductility and toughness.

Learn More

Liquid Phase Sintering

Conventional and high temperature sintering typically occur entirely in the solid state. With liquid phase sintering, some portion of the compact melts during the process while some portions remain solid. The solid portion maintains the shape of the compact while the portion that becomes liquid leads to particle rearrangement and densification.

Materials & Benefits

Liquid phase sintering is an important mechanism for the densification to near full density of tool steels such as M2 and T15. Tungsten heavy alloys such as tungsten-nickel-iron (radiation shielding) and tungsten-copper (thermal management) rely on liquid phase sintering for densification, as well as the cemented carbides for cutting tools (tungsten carbide-cobalt). Liquid Phase Sintering poses benefits for tool steels, which can reach near full density to achieve wrought-like properties for high performance applications.

Learn More

FREE ON-DEMAND WEBINAR

Webinar: Sintering in Powder Metallurgy

Learn how conventional and high temperature sintering impact common material groups like Stainless Steels, Soft Magnetic Alloys, and Low Alloy Steels.

DOWNLOAD NOW

Let's Reinvent What's Possible Together

Sintering for Powder Metallurgy, Metal Injection Molding, and 3D Printing. 

GET STARTED